After a STA connects to a WLAN, it negotiates the wireless link speed with the associated wireless router, in Mbit/s. This speed is also referred to the wireless link speed, as shown in Figure 1-2. Wireless link speed negotiated between a wireless router and a STA When a user subscribes to a 200 Mbit/s broadband package, it means that 200 Mbit/s is the downlink speed. In this document, the downlink speed is the bandwidth that a user subscribes to from a broadband carrier. Table 1-1 List of terms related to the WiFi speedĪs shown in Figure 1-2, the downlink speed is the speed at which the Internet sends traffic to you for such services as browser opening or file downloading, and is expressed in Mbit/s. Info: system is rebooting ,please wait.įor details about how to log in to an AR router using the CLI, see How to Log In to the AR Router Through the Console Port (CLI) and How to Log In to the Router Through the Mini USB Port (CLI) in How to Log In to an AR Router Through the Web and CLI. Warning: The WorkMode Change will be activated after board reboot. If the AR router does not work in Fat AP mode, run the set workmode wlan command to set the working mode to Fat AP.Wlan Config WorkMode = ap // ap indicates the Fat AP mode, and ac indicates the AC mode. If you are not sure whether the default configuration has been modified, log in to the router and run the display workmode wlan command to check its working mode. By default, an AR router with the letter W contained in its model name works in Fat AP mode, and that without the letter W contained in its model name works in AC mode. How to Determine the Working Mode of an AR Router
0 Comments
Leave a Reply. |